Stainless Steel Tanks CLEANING PROCEDURE

Step 1st
At least  for  4 hours re circulate the tank with hot water  (80 – 85 °C ) with completion of  3 machine cycle .

Step 2nd
Only applicable when tank is going for WALL WASH TEST standard specification :

THE INFORMATION BELOW IS BASED ON REVIEWS OF INDUSTRY INCIDENT INVESTIGATION REPORTS
The industry continues to experience an increasing number of incidents involving anchors, anchor chains, pawl bars / stoppers and windlass failures.

The purpose of this Safety Alert Bulletin is to highlight this continued trend to all tanker and barge operators.

Infomarine On-Line Technical Library

File	Description	File size
SafetyAlertBulletin _2_.pdf	The industry continues to experience an increasing number of incidents involving anchors, anchor chains, pawl bars / stoppers and windlass failures.	127 Kb

The purpose of this guide is to examine the hazards of cold exposure that may endanger your life, and to provide you with advice on how to prevent or minimize those dangers.
A thorough understanding of the information contained in this booklet may some day save your life.

The Maritime Safety Committee, at its eighty-first session (10 to 19 May 2006), with a view to providing enhanced guidance for passenger ships operating in cold water areas, approved the Guide to cold water survival, prepared by the Sub-Committee on Radiocommunications and Search and Rescue, at its tenth session (6 to 10 March 2006), as set out in the annex.

Infomarine On-Line Technical Library

File	Description	File size
MSC-1Circ.1185navigate-on-ice.pdf	The purpose of this guide is to examine the hazards of cold exposure that may endanger your life, and to provide you with advice on how to prevent or minimize those dangers.	156 Kb

Proper speed of the pump doesn't allow slops to build up , otherwise rewashed resulting in lost of time, that's why throughout the cleaning process , Expertise always kept cargo pump
( suitable with proper speed ) in runing condition.